===== Game Console Hardware =====

Here is the list I ordered from GameRoom Solutions and other providers

==== Game parts ====

  * (1) Track Ball 2 inch Arcade Game Trackball for PC or MAC - USB and PS2 Connectors	1
  * (1) HDMI Extender	
  * (2) Joysticks 
  * (9) Green buttons - The standard 8, plus the game select button
  * (8) Blue buttons - Standard 8 buttons
  * (2) Yellow buttons - Game select, etc.
  * (1) Red button - Game select, etc. <-- Mistake, should have ordered 2 green
  * (1) HDMI extender

==== Compute ====

  * (1) Raspberri Pi4 (repurpose an existing one I had)
  * (1) Micro USB to HDMI converter

==== Console ====

  * (1) 4'x 2' MDF Board (Lowes)
  * (1) 4'x 2' 1/2" board (for bottom of the console - also Lowes)
  * (1) 3'x 2' 1/8" Plexiglass (Amazon) 
  * (2) Inside brackets for support (Lowes)
  * (1) 10' Rubber edge corner trim, 'L' shape in red. (Amazon)
  * (1) Neoprene rubber sheet- for base. 1/8" thick 16"x30"
  * (1) Vinyl printout - Christmas gift from daughter

==== Misc. Electronics ====

I wanted a toggle switch on/off the unit and another to turn on/off button lights. 

  * Two toggle switches
  * 5v power source (at least 3A, to power the Pi)
  * 12v power source (to power the lights, which are 12v)
  * (1) green LED
  * (1) 240 ohm resistor (for LED light, which is 3.3v)

**Temporary electronic requirements**

  * USB Keyboard (used for setting up games)
  * Network connectivity

==== Snacks ====

  * Bag of almonds