Differences

This shows you the differences between two versions of the page.

--- game:hardware [2025/12/30 15:20] – created mlivolsi
+++ game:hardware [2026/01/30 14:33] (current) – [Console] mlivolsi
@@ Line 1: / Line 1: @@
 ===== Game Console Hardware =====
-Here is the list I ordered from GameRoom Solutions
+Here is the list I ordered from GameRoom Solutions and other providers
-==== List ====
+==== Game parts ====
   * (1) Track Ball 2 inch Arcade Game Trackball for PC or MAC - USB and PS2 Connectors	1
@@ Line 11: / Line 11: @@
   * (8) Blue buttons - Standard 8 buttons
   * (2) Yellow buttons - Game select, etc.
-  * (1) Red button - Game select, etc.
+  * (1) Red button - Game select, etc. <-- Mistake, should have ordered 2 green
+  * (1) HDMI extender
 ==== Compute ====
   * (1) Raspberri Pi4 (repurpose an existing one I had)
+  * (1) Micro USB to HDMI converter
 ==== Console ====
   * (1) 4'x 2' MDF Board (Lowes)
-  * (1) 4'x 2' 1/2" board (for bottom of the console
+  * (1) 4'x 2' 1/2" board (for bottom of the console - also Lowes)
   * (1) 3'x 2' 1/8" Plexiglass (Amazon)
-  * (2) Inside brackets for support
+  * (2) Inside brackets for support (Lowes)
+  * (1) 10' Rubber edge corner trim, 'L' shape in red. (Amazon)
+  * (1) Neoprene rubber sheet- for base. 1/8" thick 16"x30"
+  * (1) Vinyl printout - Christmas gift from daughter
+==== Misc. Electronics ====
+I wanted a toggle switch on/off the unit and another to turn on/off button lights.
+  * Two toggle switches
+  * 5v power source (at least 3A, to power the Pi)
+  * 12v power source (to power the lights, which are 12v)
+  * (1) green LED
+  * (1) 240 ohm resistor (for LED light, which is 3.3v)
+**Temporary electronic requirements**
+  * USB Keyboard (used for setting up games)
+  * Network connectivity
+==== Snacks ====
+  * Bag of almonds